Making a backup of your photo frame is easy! You will only need a micro SD card.
Note: Almost all frames have the following requirements for micro SD cards:
- The maximum storage of the SD card should be 32GB or less
- The format of the SD card should be FAT32 (most SD cards of this size are FAT32 by default)
If you need to format your SD card to FAT32, here's a guide to do so.
How to backup to an SD card:
- Insert the micro SD card into the frame.
- Go to Settings and press the submenu called “Backup and restore”.
- Press “Backup frame to external storage (e.g. microSD card)”.
The frame should now start backing up all your photos and connections (this might take some minutes depending on the number of photos stored on the frame).
Automatic backup from SD-card
From within the "Backup and restore" settings you can enable automatic backup if there is a compatible micro SD card inserted in the frame. If you enable it, your frame will automatically make a backup within 30 hours of you receiving new photos or making changes on your frame.
Restore from backup
Before you attempt to restore your frame, start by confirming that your backup is up-to-date.
To restore from a backup, you must first reset the frame.
Note: You cannot restore to a new Frameo frame and keep the old frame operational at the same time.